Instrumentation
iHVStat Electrophoresis System
Integrated, automated, portable and miniaturized microfluidic electrophoresis system integrating HV power supply and bipotentiostat. High voltage up to +/- 3kV and DC potential up to +/- 2V. Fully controlled by software. Bluetooth and cable connections available. Compatible with microfluidic chip holder and microchips electrophoresis.
iHVStat Electrophoresis System
Dimensions: 165 x 150 x 95 mm (L x W x H)
Interfacing: Serial RS232/ USB Adapter/ wireless (Bluetooth)
LED indicators: power, Bluetooth, cable
Battery power: LiPo - 3300 mAh
HV channels/outputs: 1/4
HV outputs polarity: Positive / negative
HV Output Voltage: ± 3000 V
HV Max. Output Current: 0.34 mA
DC-potential range: ± 2.00 V
DC-potential resolution: 1 mV
DC-offset error: ± 1 mV
Accuracy: < 0.1%
Current ranges: 1 nA to 1 μA (4 ranges)
Maximun DC current: ± 2 μA
Weight: < 0.5 Kg
Certificates: CE
Details: PC software control - MicruX Manager. Integrated interface for microfluidic chip holder. Cabeless.
iHVSTAT
HVStat Electrophoresis System
Automated, portable and miniaturized microfluidic electrophoresis system integrating HV power supply and bipotentiostat. High voltage up to +/- 3kV and DC potential up to +/- 2V. Fully controlled by software. Bluetooth and cable connections available. Compatible with microfluidic chip holder and microchips electrophoresis.
HVStat Electrophoresis System
Dimensions: 165 x 150 x 85 mm (L x W x H)
Interfacing: Serial RS232/ USB Adapter/ wireless (Bluetooth)
LED indicators: power, Bluetooth, cable
Battery power: LiPo - 3300 mAh
HV channels/outputs: 1/4
HV outputs polarity: Positive / negative
HV Output Voltage: ± 3000 V
HV Max. Output Current: 0.34 mA
DC-potential range: ± 2.00 V
DC-potential resolution: 1 mV
DC-offset error: ± 1 mV
Accuracy: < 0.1%
Current ranges: 1 nA to 1 μA (4 ranges)
Maximun DC current: ± 2 μA
Weight: < 0.5 Kg
Certificates: CE
Details: PC software control - MicruX Manager. External cables for interfacing microfluidic chip holder.
HVSTAT
NE-300 Just Infusion Syringe Pump
NE-300 offers the most basic pumping system at a very affordable price. Infusion only, does not withdraw, volume target, nor have computer interface or programmability.
NE-300 Just Infusion Syringe Pump
Dimensions: 229 x 146 x 114 mm (D x W x H)
Working mode: Infusion
Channels: 1
Motor type: Step motor
Motor step per revolution: 400
Microstepping: 1/8 to 1/2 depending on motor speed
Advance per step: 0.2126 µm to 0.8504 µm depending on motor speed
Maximum speed: 38 mm/min
Minimum speed: 0.7 µm/min
Linear force: > 150 N at minimum speed, 80 N at maximum speed
Accuracy: Within +/- 1% over length of syringe, exclusive of syringe variations
Flow rate: 12 nL/min - 20 mL/min
Syringe size: 1 - 60 mL (140 mL partially filled)
Power supply: Unregulated linear external wall adapter, country and power source specific (or compatible regulated power supply)
Weight: 1.63 Kg
Certificates: CE
NE-300
NE-1000 Full Featured Standalone Single-Syringe Pump
NE-1000 family offers a fully programmable syringe pump with infusion and withdrawal mode. It holds one syringe from 1 to 60 mL with infusion rates from 0.01 µL/min to 30 mL/min.
NE-1000 Full Featured Standalone Single-Syringe Pump
Dimensions: 229 x 146 x 114 mm (D x W x H)
Working mode: Infusion/withdrawal
Channels: 1
Motor type: Step motor
Motor step per revolution: 400
Microstepping: 1/8 to 1/2 depending on motor speed
Advance per step: 0.2126 µm to 0.8504 µm depending on motor speed
Maximum speed: 51 mm/min
Minimum speed: 0.7 µm/min
Linear force: > 150 N at minimum speed, 80 N at maximum speed
Accuracy: Within +/- 1% over length of syringe, exclusive of syringe variations
Flow rate: 12 nL/min - 30 mL/min
Syringe size: 1 - 60 mL (140 mL partially filled)
Number of program phases: 41
Comm. interface: RS-232 (network up to 100 pumps)
Power supply: Unregulated linear external wall adapter, country and power source specific (or compatible regulated power supply)
Weight: 1.63 Kg
Certificates: CE
Details: Lower (NE-1002X) and higher (NE-1010) flow rate models are available. Other Features: • Built for Automation. • Operates stand-alone or from a computer. • Easy-to-use keypad interface. • Applications range from simple infusions to complex pumping progra
NE-1000
NE-1002X Programmable Microfluidics Single-Syringe Pump
NE-1002X is a fully programmable syringe pump with infusion and withdrawal mode. It can holds 1 syringe up to 60 mL with infusion rates from 0.008 nL/hr to 2545 µL/min. It is also available in two channel version (Model NE-4002X)
NE-1002X Programmable Microfluidics Single-Syringe Pump
Dimensions: 229 x 146 x 114 mm (D x W x H)
Working mode: Infusion/withdrawal
Channels: 1
Motor type: Step motor
Motor step per revolution: 400
Microstepping: 1/16 to 1/2 depending on motor speed
Advance per step: 4.252 nm to 34.018 nm depending on motor speed
Maximum speed: 2.24 mm/min
Minimum speed: 0.014 µm/min
Accuracy: ≤± 0,5 %
Flow rate: 0.007nL/hr to 2505 µL/min
Syringe size: 1 - 60 mL (140 mL partially filled)
Number of program phases: 41
Comm. interface: RS-232 (network up to 100 pumps)
Power supply: Unregulated linear external wall adapter, country and power source specific (or compatible regulated power supply)
Weight: 1.63 Kg
Certificates: CE
NE-1002X
NE-4000 Dual-channel Syringe Pump
NE-4000 dual-channel syringe pump offers full-featured programmable capabilities with infusion and withdrawal mode.It is able to hold two syringes up to 60 mL with pumping rates from 25 µL/min to 100 mL/min. A 140 mL syringe can be filled up to 120 mL.
NE-4000 Dual-channel Syringe Pump
Dimensions: 229 x 146 x 114 mm (D x W x H)
Working mode: Infusion/withdrawal
Channels: 2
Motor type: Step motor
Motor step per revolution: 200
Microstepping: 1/8 to 1/2 depending on motor speed
Advance per step: 0.4252 µm to 1.7009 µm depending on motor speed
Maximum speed: 184 mm/min
Minimum speed: 1.3 µm/min
Linear force: > 400 N at minimum speed, 80 N at maximum speed
Accuracy: Within +/- 1% over length of syringe, exclusive of syringe variations
Flow rate: 25 µL/min - 100 mL/min
Syringe size: 1 - 60 mL (140 mL partially filled)
Number of program phases: 41
Comm. interface: RS-232 (network up to 100 pumps)
Power supply: Unregulated linear external wall adapter, country and power source specific (or compatible regulated power supply)
Weight: 1.63 Kg
Certificates: CE
NE-4000
NE-4002X Programmable 2 Channel Microfluidics Syringe Pump
NE-4002X is a fully programmable 2 channel syringe pump with infusion and withdrawal mode. It can holds 2 syringe up to 60 mL with infusion rates from 0.007 nL/hr to 1479 µL/min.
NE-4002X Programmable Microfluidics Dual-Channel Syringe Pump
Dimensions: 229 x 146 x 114 mm (D x W x H)
Working mode: Infusion/withdrawal
Channels: 2
Motor type: Step motor
Motor step per revolution: 200
Microstepping: 1/8 to 1/2 depending on motor speed
Advance per step: 0.4252 µm to 1.7009 µm depending on motor speed
Maximum speed: 184 mm/min
Minimum speed: 1.3 µm/min
Accuracy: ≤± 0,5 %
Flow rate: 0.007 nL/hr to 1480 µL/min
Syringe size: 1 - 60 mL (140 mL partially filled)
Number of program phases: 41
Comm. interface: RS-232 (network up to 100 pumps)
Power supply: Unregulated linear external wall adapter, country and power source specific (or compatible regulated power supply)
Weight: 1.63 Kg
Certificates: CE
NE-4002X
NE-1600 Multi-channel (6) Syringe Pump
Multi-syringe pump with the same full-featured programmable capabilities as the NE-1000 (up to 6 channels with infusion/withdrawal). NE-1600 holds 2, 4 or 6 syringes of up to 60 mL each or 2 or 4 syringes up to 140 mL each with infusion rates from 0.008 µL/min to 40 mL/min.
NE-1600 Multi-channel (6) Syringe Pump
Dimensions: 260 x 381 x 127 mm (D x W x H)
Working mode: Infusion/withdrawal
Channels: up to 6
Motor type: Step motor
Motor step per revolution: 200
Microstepping: 1/8 to 1/2 depending on motor speed
Advance per step: 0.1323 µm to 0.5292 µm depending on motor speed
Maximum speed: 35 mm/min
Minimum speed: 0.4 µm/min
Linear force: > 700 N at minimum speed, 130 N at maximum speed
Accuracy: Within +/- 1% over length of syringe, exclusive of syringe variations
Flow rate: 8 nL/min - 20 mL/min
Syringe size: 0.5 µL - 140 mL
Number of program phases: 41
Comm. interface: RS-232 (network up to 100 pumps)
Power supply: Unregulated linear external wall adapter, country and power source specific (or compatible regulated power supply)
Weight: 4.6 Kg
Certificates: CE
NE-1600
NE-1800 Multi-channel (8) Syringe Pump
Multi-syringe pump with the same full-featured programmable capabilities as the NE-1000 (up to 8 channels). NE-1800 series allows infusion and withdrawal, and holds 2, 4, 6 or 8 syringes of up to 10 mL each with infusion rates from 0.008 µL/min to 5,7 mL/min.
NE-1800 Multi-channel (8) Syringe Pump
Dimensions: 260 x 381 x 127 mm (D x W x H)
Working mode: Infusion/withdrawal
Channels: up to 8
Motor type: Step motor
Motor step per revolution: 200
Microstepping: 1/8 to 1/2 depending on motor speed
Advance per step: 0.1323 µm to 0.5292 µm depending on motor speed
Maximum speed: 35 mm/min
Minimum speed: 0.4 µm/min
Linear force: > 700 N at minimum speed, 130 N at maximum speed
Accuracy: Within +/- 1% over length of syringe, exclusive of syringe variations
Flow rate: 8 nL/min - 20 mL/min
Syringe size: 0.5 µL - 140 mL
Number of program phases: 41
Comm. interface: RS-232 (network up to 100 pumps)
Power supply: Unregulated linear external wall adapter, country and power source specific (or compatible regulated power supply)
Weight: 4.6 Kg
Certificates: CE
NE-1800
NE-1200 Multi-channel (12) Syringe Pumps
Multi-syringe pump with the same full-featured programmable capabilities as the NE-1000 (up to 12 channels). NE-1200 series allow infusion and withdrawal, and holds 2, 4, 6, 8, 10 or 12 syringes of up to 3 mL each with infusion rates from 0.008 µL/min to 2.0 mL/min.
NE-1200 Multi-channel (12) Syringe Pumps
Dimensions: 260 x 381 x 127 mm (D x W x H)
Working mode: Infusion/withdrawal
Channels: up to 12
Motor type: Step motor
Motor step per revolution: 200
Microstepping: 1/8 to 1/2 depending on motor speed
Advance per step: 0.1323 µm to 0.5292 µm depending on motor speed
Maximum speed: 35 mm/min
Minimum speed: 0.4 µm/min
Linear force: > 700 N at minimum speed, 130 N at maximum speed
Accuracy: Within +/- 1% over length of syringe, exclusive of syringe variations
Flow rate: 8 nL/min - 20 mL/min
Syringe size: 0.5 µL - 140 mL
Number of program phases: 41
Comm. interface: RS-232 (network up to 100 pumps)
Power supply: Unregulated linear external wall adapter, country and power source specific (or compatible regulated power supply)
Weight: 4.6 Kg
Certificates: CE
NE-1200
NE-8000 High Pressure Programmable Single Syringe Pump
NE-8000 is a fully programmable stand-alone high pressure syringe pump with infusion and withdrawal mode. It holds 1 syringe up to 140 mLwith infusion rates from 1.733 µL/hr to 340.6 mL/min
Special Application: Continuous Infusion (Push-Pull) and Dual Syringe Pump
Using 2 NE-8000 pumps attached with a cable, one pump will infuse while the other pump refills or have simultaneous infusion.
NE-8000 High Pressure Programmable Single-Syringe Pump
Dimensions: 285 x 155 x 162 mm (L x W x H)
Working mode: Infusion/withdrawal
Channels: 1
Motor type: Step motor
Motor step per revolution: 200
Microstepping: 1/8 to 1/1 depending on motor speed
Advance per step: 0.505 µm to 4.042 µm depending on motor speed
Maximum speed: 300.3 mm/min
Minimum speed: 1.66 µm/min
Accuracy: Within +/- 1% over length of syringe, exclusive of syringe variations
Flow rate: 1.726 µL/hr to 247.40 mL/min
Syringe size: 0.5 µL - 140 mL
Number of program phases: 41
Comm. interface: RS-232 (network up to 100 pumps)
Weight: 3.5 kg
Certificates: CE
NE-8000
dLSP-510 Digital Lab Single-Syringe Pump
High precision and stable fluid delivery single-channel digital pump, ideal for microfluidic, electrospinning, toxicology studies, capillary electrophoresis, neuroscience, etc. application.
dLSP-510 Digital Lab Single-Syringe Pump
Dimensions: 260 x185x180 mm (Dx W x H) drive unit, 190 mm x 123 mm x 33 mm (D x W x H) controller unit
Applications: Electrospinning, Microfluidics, Animal experiments, toxicology studies, Capillary electrophoresis, Drug Discovery, Cell Injections, Microcapsules, Catalyzer, Neuroscience, Organic Synthesis, Nutrition Science
Working mode: infusion, withdrawal, infusion/withdrawal, autorepeated, programming (on dedicated PC software)
Channels: 1
Motor type: Step motor
Microstepping: 1/64
Advance per step: 0.03255 µm / µstep
Maximum speed: 180 mm/min
Minimum speed: 0.0833 µm/min
Linear force: 40 lbs/18 kg (100% force selection)
Accuracy: ≤± 0,5 %
Flow rate: 0.0007 nL/ min (siringe 0.5 µL) - 120.044 mL /min (syringe 60 mL)
Syringe size: 0.5 µL - 60 mL
Comm. interface: USB-B, USB-A, Wifi, Bluetooth, Ethernet, etc
Display: 7 Inch, 1024x600, IPS HD LCD
Power supply: AC 100 V - 240 V-30 W 50/60 Hz
Operating temperature: 5 ºC - 40 º C
Humidity: < 85 %
Weight: 3.49 kg (drive unit), 0.37 kg (controller)
IP rate: IP31
Certificates: CE
LP-dLSP-510
54 Products. View all
Delivery
We ship the products under strict security measures, ensuring their protection...
More information
- Mora-Garay Industrial Park · Building #6 · Juan de la Cierva, 2C, 33211 Gijón (Asturias), Spain
- Phone/Fax: (+34) 984 151 019
- Email: info@micruxfluidic.com
- Web: www.micruxfluidic.com
Contact
MICRUX® - All rights reserved - 2024